
ボンとバブラー: 主な違いの説明
Emma Chen
Glass Specialist
ボンとバブラー: 主な違いの説明
ボンブとバブラーはどちらも、水ろ過を使用して煙を冷やして滑らかにしますが、目的や状況は異なります。 この比較は、それぞれが優れている場合に、どのようなニーズに適しているかを理解するのに役立ちます。
迅速な答え
ボンはより大きく、より大きく、よりスムーズなヒットを提供し、自宅で最もよく機能し、交換可能な部品を備えています。 バブラーはより小さく、より携帯性が高く、パイプとボンの間のどこかに滑らかさで当たり、通常は 1 つの堅い部分があります。 家庭用のボンズと最大の滑らかさを選択してください。水のろ過による携帯性のためのバブラー。
基本的な違い
Bong: 家庭での使用と最大のろ過用に設計された複数の個別の部品 (ボウル、ダウンステム、チューブ) を備えた大きな水道管。
Bubbler: 通常は 1 つの頑丈な部分で、水のろ過を提供しながら、持ち運びに対応できるように設計された、より小さな水道管。
泡立て器は、水のチャンバーを獲得するパイプと考えてください。それは、乾いたパイプと完全なボンの間の中間です。
サイズ比較
Bongs
典型的なボン: 高さ 12 ~ 16 インチ
Bubblers
典型的なバブラー: 身長 5 ~ 7 インチ
勝者: ブラーズ for portability, Bongs for capacity
水の容量とろ過
より多くの水 = より多くのろ過 = より滑らかな打撃
Bongs
- 重要な水を保持します (サイズによって 1 ~ 4 カップ以上)
- より大きな貯水池
- 複数のパーコレーターが可能
- 最大のろ過と冷却
- 可能な限りスムーズなヒット
Bubblers
- 少量の水を保持します (大さじ数杯から 1/2 カップ)
- 単一の小さな部屋
- パーコレーターの限られた部屋
- 基本的な水ろ過
- パイプより滑らかで、ボンよりも軽い
勝者:ボンズ - significantly more filtration capacity
ヒットの滑らかさ
ボンの滑らかさ: ★★★★★★
- 水量が多いと煙が大幅に冷える
- 複数のパーコレーターが追加の濾過を追加
- さらにクールなヒットに利用できるアイスキャッチャー
- より少ない過酷さで大ヒットを記録できます
- 敏感な喉の最良の選択肢
泡の滑らかさ: ★★★☆☆☆
- ドライパイプよりも顕著な改善
- 水は基本的な冷却を提供します
- まだボンズよりも厳しい
- 通常、より小さなヒット
- 適度な消費には適しています
勝者:ボンズ - noticeably smoother, especially for large hits
ポータビリティ
ボンの携帯性
課題:
- 大きくて交通の便が悪い
- ガラスバージョンが壊れやすい
- 水は空にする必要があります
- 追跡する複数のピース
- 1 か所で保管するのが一番よい
Solutions:
- シリコンボンが存在する (壊れない)
- ミニボンは、ある程度の携帯性を提供します
- パッド入りケースが利用可能
- ホームピースとしては今でも最高です
バブラーの携帯性
利点:
- コンパクトなサイズでバッグに収まります
- ワンピースのデザイン(失うものは何もありません)
- 対処する水が少ない
- もっと目立たない
- 旅行によく効く
考慮事項:
- ガラスはまだ壊れやすい
- シリコンバブラーが利用可能
- 輸送のために水を空にする必要があります
勝者: ブラーズ - much more portable
使いやすさ
ボンを使って
Steps:
1. 水を満たしてください(レベルが正しくなければなりません)
2.大麻をすりつぶす
3. パックボウル
4. ゆっくりと軽く吸入する
5.ボウルを取り出して透明にする
6. 必要に応じて水を空にする/補充する
Complexity: 中程度 - 水位が重要で、清掃技術が必要
バブラーを使って
Steps:
1. 少量の水を加える
2.大麻をすりつぶす
3. パックボウル
4. 軽くて吸う
5. 炭水化物を放出してクリアする
Complexity: 低い - パイプに似ていますが、水があります
勝者: ブラーズ - slightly simpler, less water management
掃除の難しさ
ボンの掃除
利点:
- パーツに分解
- Each piece cleaned separately
- Downstem and bowl accessible
- Wider openings typically
- More product options (brushes fit)
Process:
1. Disassemble
2. Rinse each piece
3. Soak in alcohol + salt
4. Shake or scrub
5. Rinse thoroughly
6. Dry and reassemble
Time: 15-30 minutes for deep clean
Cleaning a Bubbler
Challenges:
- Usually one solid piece
- Hard to reach interior
- Small water chamber
- Internal areas inaccessible
- Limited brush access
Process:
1. Empty and rinse
2. Fill with alcohol + salt
3. Shake vigorously
4. Let soak longer
5. Repeat as needed
6. Rinse thoroughly
Time: 20-40 minutes, more difficult to get fully clean
Winner: Bongs - much easier due to disassembly
Durability
Bong Durability
Glass Bongs:
- Fragile - break if dropped
- Thick glass (5mm+) helps
- Beaker base most stable
- Multiple pieces = more break points
Silicone Bongs:
- Nearly indestructible
- Can be rolled/packed
- Slight taste difference
- Great for clumsy users
Bubbler Durability
Glass Bubblers:
- Fragile but smaller
- Less surface area to hit
- One piece = one break point
- Thicker glass options available
Silicone Bubblers:
- Very durable
- Perfect for travel
- Easy to pack
Winner: Tie - both have glass and silicone options, similar durability within each
Price Comparison
Bong Prices
Note: Replacement parts (bowls, downstems) cost $10-40 each
Bubbler Prices
Note: If bowl breaks, entire bubbler may be unusable
Winner: Bubblers - generally cheaper, though no parts to replace
When to Choose a Bong
Best For:
- Home use primarily - You have a dedicated spot
- Maximum smoothness - Sensitive throat/lungs
- Group sessions - Larger capacity for sharing
- Big hits - Chamber holds more smoke
- Customization - Want to upgrade parts over time
- Daily use - Easier to clean long-term
Situations:
- Apartment/house smoking
- Relaxed evening sessions
- Entertaining friends
- Those who prefer water filtration
When to Choose a Bubbler
Best For:
- Portability needed - You move around
- Smaller hits - Don't need huge clouds
- Simplicity - Don't want multiple parts
- Discretion - Smaller profile
- Pipe users - Want upgrade in smoothness
- Solo use - Small chamber perfect for one
Situations:
- Outdoor use
- Visiting friends
- Travel
- Limited storage space
- Wanting more than a pipe
Hybrid Options
Mini Bongs
- 6-8 inch bongs
- More portable than standard
- Still disassemble
- Good middle ground
Large Bubblers
- 7-10 inch bubblers
- Approach mini bong territory
- More water capacity
- Still one piece
Silicone of Either
- Both available in silicone
- Unbreakable
- Roll-up travel friendly
- Slight taste compromise
The Verdict
Get a Bong if: Smoothness is priority, you use at home, you want to customize.
Get a Bubbler if: Portability is priority, you want simplicity, you're upgrading from pipes.
Get Both if: Different situations call for different tools. Many enthusiasts own both.
This guide is for educational purposes. Cannabis laws vary by jurisdiction.
Frequently Asked Questions
Not quite. Bubblers provide smoother hits than pipes but less smooth than full-size bongs. The smaller water chamber means less filtration. For maximum smoothness, bongs win.
Related Guides

Ash Catchers: What They Do and Why Use One
Learn what ash catchers do, how they keep your bong clean, and whether you need one. Understand different types, how to choose the right size, and maintenance tips.

Anatomy of a Bong: Every Part Explained
Complete guide to understanding bong components - from downstem and bowl to percolators and ice catchers. Learn what each part does and how they work together.

Bong Water Alternatives: What to Put in Your Bong Besides Water
Explore safe bong water alternatives like tea, fruit-infused water, and ice water. Learn which liquids enhance flavor, which to avoid, and the science behind bong filtration.